← JBJ 28 Nano-Cube LED · All nano reef lights
Best lights for the JBJ 28 Nano-Cube LED
Match the fixture's coverage footprint to your tank's display footprint — a light rated for a 12×12 in area is a poor fit over a 16×16 in tank. Then pick an intensity tier based on your corals: low for soft corals or FOWLR, medium for LPS or mixed reefs, high for SPS. Most nano light manufacturers don't publish PAR, so coverage and intensity tier are the practical sizing handles.
The JBJ 28 Nano-Cube LED is the long-running classic 28-gallon all-in-one with a roughly 22 × 18 in footprint and 22 in height. It ships with an integrated LED hood, available in a Professional 89W build or a lower-output Intermediate 27W build. The constraining center rear chamber accepts an inTank media basket measuring about 4.25 in wide × 2.375 in front-to-back, so the ~2.5 in depth is the limiting dimension for skimmers and reactors (community/aftermarket measurement, not factory-published). Stock circulation uses two Accela pumps rated 266 GPH each, one feeding the display return.
Ranked for an LPS / mixed-reef setup. For SPS or soft-only goals, use the sizing tool.
Kessil A160WE Tuna Blue $259.00
- covers 22×16" display area
- LPS/mixed intensity meets your LPS goal
All lights compared
| Light | Coverage | Intensity | Price | Verdict |
| Kessil A160WE Tuna Blue Kessil | 24×24″ | Medium | $259.00 | Top pick |
| Nicrew HyperReef 50 (Gen 2) Nicrew | 24×24″ | Medium | — | Recommended |
| AI Prime 16HD Reef Aqua Illumination | 24×24″ | High | $264.99 | Recommended |
| Reef Breeders Reef Nano LED Reef Breeders | 24×24″ | High | $169.99 | Recommended |
| Fluval Marine 3.0 Nano (20W) Fluval | 9×9″ | Low | $109.99 | Too dim for goal |
| AI Blade Grow 12" Aqua Illumination | 12×12″ | Medium | $263.99 | Not ideal |
| Fluval Marine 3.0 (22W, 15-24") Fluval | 24×12″ | Medium | — | Not ideal |
| Kessil A80 Tuna Blue Kessil | 24×24″ | Low | $139.00 | Too dim for goal |
FAQ
Why use coverage footprint and intensity tier instead of PAR?
Most nano fixture manufacturers don't publish PAR data, so PAR-based comparisons aren't possible across the market. Coverage footprint and intensity tier give you a consistent, actionable way to match a light to your tank size and coral type without needing a PAR meter.
What intensity tier do I need for a mixed LPS reef?
Choose a medium-intensity fixture for a mixed LPS or mixed reef tank. Low-intensity lights are sufficient for soft corals and FOWLR setups, while high-intensity fixtures are needed only if you plan to keep demanding SPS corals.
Can I use a light rated for a larger footprint than my tank?
Yes, but it introduces more risk than benefit on a nano. You may end up with excess intensity at the center and uneven coverage, and you'll pay for output you don't need. Matching footprint closely is the better approach.